Mipa CC14 THIX 2K clear coat is suitable for applications where the best possible surface quality is desired, even with thick layers. The CC14 lacquer is thixotropic, allowing thick layers to be sprayed even on vertical surfaces. Especially on horizontal surfaces, thick layers can be applied without the risk of evaporation blisters or loss of gloss. With CC14 lacquer, a smooth surface and high gloss are easily achieved.
It is ideal for large surfaces, show car finishes, flake coatings, etc. It is suitable for both water-based and solvent-based basecoats.
Usage: See also the PDF below for TDS information (Technical Data Sheet).
-Mix with HS hardener in a 2:1 ratio (2 parts lacquer, 1 part hardener). Note! The hardener is sold separately.
-The mixture is ready to use immediately after adding the hardener, but if needed, it can be thinned with V25 thinner (0–5%).
-Pot life: With HS 25 hardener – 2.5 hours (room temperature 20°C), with HS 10 hardener – 1 hour (room temperature 20°C).
-Flash-off time between coats: 1–3 minutes, 10–15 minutes before baking.
Packaging: 1-liter can.
Käyttöturvallisuustiedote (finnish)
TDS Mipa CC 14 (english)
Reviews
There are no reviews yet.