Hardener – Mipa HS 10 – 0,5 liter

Usage: See also the PDF below for hardener information.

-Mix with Mipa clear coat in a 2:1 ratio (2 parts lacquer, 1 part hardener), or 3:1 (for CPE and CCD clear coats).
-The mixture is ready for use after adding the hardener, but it can be thinned with V25 thinner (0-5%) if necessary.
-Pot life (usable time): With HS 25 – 2.5 hours (room temperature 20°C), with HS 10 – 1 hour (room temperature 20°C).
-Flash-off time between coats: 1-3 minutes, 10-15 minutes before baking.

Packaging: 0.5-liter can.

Käyttöturvallisuustiedote HS 25 kovettaja (finnish)
TDS Mipa hardener (english)